English
Any kind of material has its own characteristics, and the laser light guide plate is no exception. Then, the characteristics of its material technology refer to the ability of this material to meet the requirements. It can be shown in the characteristics of the data. These factors determine whether it is suitable for processing into what kind of products and the quality of the products.
characteristic:
1. No dot-matrix guided light technology: the surface of the guided light plate does not need any dots, network planning and processing, which greatly improves the manufacturing efficiency;
2. Diffuse reflection principle: high light conversion rate, uniform light effect, soft, not dazzling;
3. Stable performance: the light guide material is independently developed and produced, using pure MMA monomer casting, assembly line production, controlling the stability of product quality from the source, and ensuring the uniform performance of each batch of products;
4. Breaking through the limitations of traditional light guide plates: it can be cut into any shape, can be hot-bent, and can be used in splicing;
5. It can be used both indoors and outdoors, with non-extreme use environment, almost no attenuation of optical performance, and the service life can reach 8-10 years;
6. Natural double-sided light guide, which can be used on one side or both sides, such as double-sided use is more cost-effective;
7. Any point light source and line light source can be used for surface light source conversion. The light source includes LED, lamp tube, laser, etc.;
8. It can be stocked, easy to control the loss, and improve the comprehensive utilization rate of the original board.
To put it simply, the light guide plate is made of optical-grade acrylic/PC sheet, and then high-tech materials with extremely high refractive index and non-absorbing light are used to engrave the bottom surface of the optical-grade acrylic sheet with laser engraving, V-shaped cross grid engraving, and UV mesh. Plate printing technology to print light guide points. The optical-grade acrylic plate is used to absorb the light emitted from the lamp to stay on the surface of the optical-grade acrylic plate. When the light hits each light guide point, the reflected light will spread to all angles, and then destroy the reflection condition and be emitted from the front of the light guide plate. Through various light guide points of different densities and sizes, the light guide plate can be made to emit light evenly. As a manufacturer of laser light guide plates, Guangdong Jinmingwei Optoelectronics will also introduce more knowledge about the industry to you one after another. Looking forward to your support Cooperation.
