The led light guide plate must master these points in order to better play its role

For modern society, lamps are not only used for lighting, but also often used for decoration. For example, the lights and store names or signboards we see at night often use light boxes, so it needs to be applied at this time. The light guide plate can make the light more uniform and also save electricity. However, in the process of installation, operation and use of the led light guide plate, the following points must be mastered in order to better play its role.

1. Avoid surface scratches

Since the surface of the light guide plate is very soft, the surface hardness of the light guide plate is equivalent to that of the aluminum surface, so special attention should be paid during the construction and installation process. Efficient and professional light guide plate manufacturers emphasize that during normal use, protective measures should also be taken to prevent deformation or damage.

2. Leave room for thermal expansion and contraction

Since the LED light guide plate has the same expansion coefficient as ordinary plastics, there will be certain changes in expansion and contraction when the temperature rises, so this must be taken into account when installing. Manufacturers of light guide plates with guaranteed quality remind that a certain gap should be left to provide space for expansion and contraction. During storage and use, the indoor temperature and humidity should be kept under proper conditions to prevent the product from being usable. Use longer.

3. Keep the environment tidy

The LED light guide plate has high requirements on the surrounding environment during the installation process, and usually needs to be operated in a clean room of a certain level. The external environment is important, but doing it well is not enough. At the same time, operators should also wear corresponding protective equipment to avoid indirect contamination of the product.

The above are the key points of the installation and operation of the led light guide plate. In addition, a protective film should be pasted on the surface of the light guide plate to prevent external damage. And if you don't need to install it, don't rush to unpack it. If it has been disassembled, it should be assembled immediately, which can effectively avoid dust pollution.